Soap bases
ZENISOAPBASE
All the soap bases we produce
are SLS Free
ZENISOAPBASE
All the soap bases we produce
are SLS Free
ZENISOAPBASE Shea-C
Transparent soap base with a shea butter
Transparent soap base with a shea butter
This soap base made with Natural Unrefined Shea Butter (saponified with NaOH) delivered from Ghana. The Unrefined Shea butter provides pale yellow shade and specific weak nutty smell.
This soap base is perfect for large-scale production.
It is transparent soap base which quick solidifies to extract from the mould after short time.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 70-75˚C or microwave (50-70% max power).
DO NOT EXCEED 80˚C !
AVOID THE BOILING !
Keep it melted at 70˚C if needed.
Use fragrances for alkaline medium
Ingredients: glycerine, aqua, sodium stearate, propylen glycol, sodium laurate, sorbitol, sodium laureth sulfate, shea butter (saponified with NaOH), sodium chloride, disodium laureth sulfosuccinate, tetrasodium EDTA.
This soap base is perfect for large-scale production.
It is transparent soap base which quick solidifies to extract from the mould after short time.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 70-75˚C or microwave (50-70% max power).
DO NOT EXCEED 80˚C !
AVOID THE BOILING !
Keep it melted at 70˚C if needed.
Use fragrances for alkaline medium
Ingredients: glycerine, aqua, sodium stearate, propylen glycol, sodium laurate, sorbitol, sodium laureth sulfate, shea butter (saponified with NaOH), sodium chloride, disodium laureth sulfosuccinate, tetrasodium EDTA.
ZENISOAPBASE Pro-C
Transparent quick solidifying soap base
Transparent quick solidifying soap base
This soap base is perfect for large-scale production.
It is high transparent soap base which quick solidifies to extract from the mould after short time.
Because of its high transparency it suits better for the soap with pictures.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 70-75˚C or microwave (50-70% max power).
DO NOT EXCEED 80˚C !
AVOID THE BOILING !
Keep it melted at 70˚C if needed.
Use fragrances for alkaline medium
Ingredients: glycerine, aqua, sodium stearate, propylen glycol, sodium laurate, sorbitol, sodium laureth sulfate, sodium chloride, disodium laureth sulfosuccinate, tetrasodium EDTA.
It is high transparent soap base which quick solidifies to extract from the mould after short time.
Because of its high transparency it suits better for the soap with pictures.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 70-75˚C or microwave (50-70% max power).
DO NOT EXCEED 80˚C !
AVOID THE BOILING !
Keep it melted at 70˚C if needed.
Use fragrances for alkaline medium
Ingredients: glycerine, aqua, sodium stearate, propylen glycol, sodium laurate, sorbitol, sodium laureth sulfate, sodium chloride, disodium laureth sulfosuccinate, tetrasodium EDTA.
ZENISOAPBASE Super Pro
Universal transparent soap base
Universal transparent soap base
The soap base is ideal for the most applications.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 70-75˚C or microwave (50-70% max power).
DO NOT EXCEED 80˚C !
AVOID THE BOILING !
Keep it melted at 70˚C if needed.
Use fragrances for alkaline medium
Ingredients: glycerine, aqua, sodium stearate, propylen glycol, sodium laurate, sorbitol, sodium laureth sulfate, sodium chloride, disodium laureth sulfosuccinate, tetrasodium EDTA.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 70-75˚C or microwave (50-70% max power).
DO NOT EXCEED 80˚C !
AVOID THE BOILING !
Keep it melted at 70˚C if needed.
Use fragrances for alkaline medium
Ingredients: glycerine, aqua, sodium stearate, propylen glycol, sodium laurate, sorbitol, sodium laureth sulfate, sodium chloride, disodium laureth sulfosuccinate, tetrasodium EDTA.
ZENISOAPBASE Pro-W
White quick solidifying soap base
White quick solidifying soap base
This soap base is perfect for large-scale production.
It is white soap base which quick solidifies to extract from the mould after short time.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
TiO2 never drips down.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 70-75˚C or microwave (50-70% max power).
DO NOT EXCEED 80˚C !
AVOID THE BOILING !
Keep it melted at 70˚C if needed.
Use fragrances for alkaline medium
Ingredients: glycerine, aqua, sodium stearate, propylen glycol, sodium laurate, sorbitol, sodium laureth sulfate, sodium chloride, disodium laureth sulfosuccinate, titanium dioxide, tetrasodium EDTA.
It is white soap base which quick solidifies to extract from the mould after short time.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
TiO2 never drips down.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 70-75˚C or microwave (50-70% max power).
DO NOT EXCEED 80˚C !
AVOID THE BOILING !
Keep it melted at 70˚C if needed.
Use fragrances for alkaline medium
Ingredients: glycerine, aqua, sodium stearate, propylen glycol, sodium laurate, sorbitol, sodium laureth sulfate, sodium chloride, disodium laureth sulfosuccinate, titanium dioxide, tetrasodium EDTA.
ZENISOAPBASE Clear
High transparent soap base
High transparent soap base
The soap base has very high transparency level.
It is quite long-solidifying soap base what is convenient to make high detailed soap.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 65-70˚C or microwave (50-70% max power).
DO NOT EXCEED 75˚C !
AVOID THE BOILING !
Keep it melted at 65˚C if needed.
Use fragrances for alkaline medium
Ingredients: Aqua, glycerine, sodium stearate, propylene glycol, sorbitol, sodium laurate, sodium laurethsulfate, disoduim laureth sulfosuccinate, sodium chloride, stearic acid, lauric acid, tetrasodium EDTA.
It is quite long-solidifying soap base what is convenient to make high detailed soap.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 65-70˚C or microwave (50-70% max power).
DO NOT EXCEED 75˚C !
AVOID THE BOILING !
Keep it melted at 65˚C if needed.
Use fragrances for alkaline medium
Ingredients: Aqua, glycerine, sodium stearate, propylene glycol, sorbitol, sodium laurate, sodium laurethsulfate, disoduim laureth sulfosuccinate, sodium chloride, stearic acid, lauric acid, tetrasodium EDTA.
ZENISOAPBASE White
Intense-white soap base
Intense-white soap base
The soap base has intense-white color.
!!! To colour with ZENICOLOR it is better to mix 70% of ZENISOAPBASE Clear and 30% of ZENISOAPBASE White not to overspend the colorants.
It is quite long-solidifying soap base what is convenient to make high detailed soap.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 65-70˚C or microwave (50-70% max power).
DO NOT EXCEED 75˚C !
AVOID THE BOILING !
Keep it melted at 65˚C if needed.
Use fragrances for alkaline medium
Ingredients: Aqua, glycerine, sodium stearate, propylene glycol, sorbitol, sodium laurate, sodium laurethsulfate, disoduim laureth sulfosuccinate, sodium chloride, titanium dioxide, stearic acid, lauric acid, tetrasodium EDTA.
!!! To colour with ZENICOLOR it is better to mix 70% of ZENISOAPBASE Clear and 30% of ZENISOAPBASE White not to overspend the colorants.
It is quite long-solidifying soap base what is convenient to make high detailed soap.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 65-70˚C or microwave (50-70% max power).
DO NOT EXCEED 75˚C !
AVOID THE BOILING !
Keep it melted at 65˚C if needed.
Use fragrances for alkaline medium
Ingredients: Aqua, glycerine, sodium stearate, propylene glycol, sorbitol, sodium laurate, sodium laurethsulfate, disoduim laureth sulfosuccinate, sodium chloride, titanium dioxide, stearic acid, lauric acid, tetrasodium EDTA.
ZENISOAPBASE Lowsweat-C
Transparent low sweat soap base
Transparent low sweat soap base
The high sweating resistant soap base to make soap for using in wet weather conditions.
It is quite long-solidifying soap base what is convenient to make high detailed soap.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap made of this soap base must be wrapped hermetically not to loose weight by the water evaporation.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 65-70˚C or microwave (50-70% max power).
DO NOT EXCEED 75˚C !
AVOID THE BOILING !
Keep it melted at 65˚C if needed.
Use fragrances for alkaline medium
Ingredients: Aqua, sodium stearate, propylene glycol, sorbitol, succrose, glycerine, sodium laurate, sodium laurethsulfate, disoduim laureth sulfosuccinate, sodium chloride, stearic acid, lauric acid, tetrasodium EDTA.
It is quite long-solidifying soap base what is convenient to make high detailed soap.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap made of this soap base must be wrapped hermetically not to loose weight by the water evaporation.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 65-70˚C or microwave (50-70% max power).
DO NOT EXCEED 75˚C !
AVOID THE BOILING !
Keep it melted at 65˚C if needed.
Use fragrances for alkaline medium
Ingredients: Aqua, sodium stearate, propylene glycol, sorbitol, succrose, glycerine, sodium laurate, sodium laurethsulfate, disoduim laureth sulfosuccinate, sodium chloride, stearic acid, lauric acid, tetrasodium EDTA.
ZENISOAPBASE Lowsweat-W
White low sweat soap base
White low sweat soap base
The high sweating resistant soap base to make soap for using in wet weather conditions.
It is quite long-solidifying soap base what is convenient to make high detailed soap.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap made of this soap base must be wrapped hermetically not to loose weight by the water evaporation.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 65-70˚C or microwave (50-70% max power).
DO NOT EXCEED 75˚C !
AVOID THE BOILING !
Keep it melted at 65˚C if needed.
Use fragrances for alkaline medium
Ingredients: Aqua, sodium stearate, propylene glycol, sorbitol, succrose, glycerine, sodium laurate, sodium laurethsulfate, disoduim laureth sulfosuccinate, sodium chloride, titanium dioxide, stearic acid, lauric acid, tetrasodium EDTA.
It is quite long-solidifying soap base what is convenient to make high detailed soap.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap made of this soap base must be wrapped hermetically not to loose weight by the water evaporation.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 65-70˚C or microwave (50-70% max power).
DO NOT EXCEED 75˚C !
AVOID THE BOILING !
Keep it melted at 65˚C if needed.
Use fragrances for alkaline medium
Ingredients: Aqua, sodium stearate, propylene glycol, sorbitol, succrose, glycerine, sodium laurate, sodium laurethsulfate, disoduim laureth sulfosuccinate, sodium chloride, titanium dioxide, stearic acid, lauric acid, tetrasodium EDTA.
ZENISOAPBASE Swirl-C
Transparent soap base for swirled pattern soap
Transparent soap base for swirled pattern soap
This soap base has a high viscose consistence when melted. If two different coloured portions of that soap base poured together they would not mix to each other and the swirled pattern can be drawn easily.
Due to the viscose consistence this soap base suits for the soap with non-solving particles because they are uniformly distributed in soap volume.
Provides strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 65-70˚C or microwave (50-70% max power).
DO NOT EXCEED 75˚C !
AVOID THE BOILING !
Keep it melted at 65˚C if needed.
Use fragrances for alkaline medium
Ingredients: Aqua, glycerine, sodium stearate, propylene glycol, sorbitol, sodium laurate, sodium laurethsulfate, disoduim laureth sulfosuccinate, silica, sodium chloride, stearic acid, lauric acid, tetrasodium EDTA.
Due to the viscose consistence this soap base suits for the soap with non-solving particles because they are uniformly distributed in soap volume.
Provides strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 65-70˚C or microwave (50-70% max power).
DO NOT EXCEED 75˚C !
AVOID THE BOILING !
Keep it melted at 65˚C if needed.
Use fragrances for alkaline medium
Ingredients: Aqua, glycerine, sodium stearate, propylene glycol, sorbitol, sodium laurate, sodium laurethsulfate, disoduim laureth sulfosuccinate, silica, sodium chloride, stearic acid, lauric acid, tetrasodium EDTA.
ZENISOAPBASE Swirl-W
White soap base for swirled pattern soap
White soap base for swirled pattern soap
This soap base has a high viscose consistence when melted. If two different coloured portions of that soap base poured together they would not mix to each other and the swirled pattern can be drawn easily.
Due to the viscose consistence this soap base suits for the soap with non-solving particles because they are uniformly distributed in soap volume.
Provides strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 65-70˚C or microwave (50-70% max power).
DO NOT EXCEED 75˚C !
AVOID THE BOILING !
Keep it melted at 65˚C if needed.
Use fragrances for alkaline medium
Ingredients: Aqua, glycerine, sodium stearate, propylene glycol, sorbitol, sodium laurate, sodium laurethsulfate, disoduim laureth sulfosuccinate, silica, sodium chloride, titanium dioxide, stearic acid, lauric acid, tetrasodium EDTA.
Due to the viscose consistence this soap base suits for the soap with non-solving particles because they are uniformly distributed in soap volume.
Provides strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 65-70˚C or microwave (50-70% max power).
DO NOT EXCEED 75˚C !
AVOID THE BOILING !
Keep it melted at 65˚C if needed.
Use fragrances for alkaline medium
Ingredients: Aqua, glycerine, sodium stearate, propylene glycol, sorbitol, sodium laurate, sodium laurethsulfate, disoduim laureth sulfosuccinate, silica, sodium chloride, titanium dioxide, stearic acid, lauric acid, tetrasodium EDTA.
ZENISOAPBASE Shea-W
White soap base with a shea butter
White soap base with a shea butter
This soap base made with Natural Unrefined Shea Butter (saponified with NaOH) delivered from Ghana. The Unrefined Shea butter provides pale yellow shade and specific weak nutty smell.
This soap base is perfect for large-scale production.
It is white soap base which quick solidifies to extract from the mould after short time.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
TiO2 never drips down.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 70-75˚C or microwave (50-70% max power).
DO NOT EXCEED 80˚C !
AVOID THE BOILING !
Keep it melted at 70˚C if needed.
Use fragrances for alkaline medium
Ingredients: glycerine, aqua, sodium stearate, propylen glycol, sodium laurate, sorbitol, sodium laureth sulfate, shea butter (saponified with NaOH), sodium chloride, disodium laureth sulfosuccinate, titanium dioxide, tetrasodium EDTA.
This soap base is perfect for large-scale production.
It is white soap base which quick solidifies to extract from the mould after short time.
Provides very strong interlayer adhesion (oversprayed with an alcohol).
The soap base less shrinks what is the significant advantage when it is unwrapped during long time.
TiO2 never drips down.
SLS Free.
Does not contain any animal derived ingredients. Not tested on animals.
Cut the soap base into cubes 1-3 cm side lenght.
Melt it with bain-marie at 70-75˚C or microwave (50-70% max power).
DO NOT EXCEED 80˚C !
AVOID THE BOILING !
Keep it melted at 70˚C if needed.
Use fragrances for alkaline medium
Ingredients: glycerine, aqua, sodium stearate, propylen glycol, sodium laurate, sorbitol, sodium laureth sulfate, shea butter (saponified with NaOH), sodium chloride, disodium laureth sulfosuccinate, titanium dioxide, tetrasodium EDTA.
ZENISOAPBASE Creamy Soap
Soap base for creamy soap, scrubbing soap, soap mousse etc.
Soap base for creamy soap, scrubbing soap, soap mousse etc.
This soap base does not contain any water. That's why it does not loose the weight and does not solve water-solving additions (for example sugar).
Due to the high percentage of the glycerine it leaves pleasant feeling on skin.
Contain "green" surfactants.
Water can be added up to 20%*
Oils can be added up to 3%*
Does not contain any animal derived ingredients. Not tested on animals.
Ingredients: Glycerine, stearic acid, sodium stearate, sodium cocsulfate, sodiuim cocoylisethionat, maltodextrin, methylchloroisothiazolinone, methylisothiazolinone.
* water and oils MUST NOT BE ADDED TOGETHER. Only one or another.
Due to the high percentage of the glycerine it leaves pleasant feeling on skin.
Contain "green" surfactants.
Water can be added up to 20%*
Oils can be added up to 3%*
Does not contain any animal derived ingredients. Not tested on animals.
Ingredients: Glycerine, stearic acid, sodium stearate, sodium cocsulfate, sodiuim cocoylisethionat, maltodextrin, methylchloroisothiazolinone, methylisothiazolinone.
* water and oils MUST NOT BE ADDED TOGETHER. Only one or another.
| Learning video |
